Recor
d
in
g
to
M
Ds
masterpage:Left
(3 column)
filename[F:\My Document\mds-
s50\4230403131\4230403131\423040313MDSS50U2\GB05OPE-U2.fm]
model name1[MDS-S50]]
[4-230-403-13(1)]
15
Operations you may want to do
during CD Synchro-recording
Tips
•
You can use the remote of the CD player during CD
Synchro-recording.
•
During CD Synchro-recording, track numbers are
marked in the following ways:
— When the CD player is connected to the
DIGITAL IN connector, track numbers are
automatically marked as they appear on the CD.
— When the CD player is connected to the
ANALOG IN jacks, track numbers are
automatically marked when “T.Mark Lsync” has
been selected (page 10).
— When you resume recording after recording
pause, a new track number is automatically
marked, regardless of the track marking
parameter setting (“T.Mark Lsync” or “T.Mark
Off”).
•
By reprograming the MD’s remote, you can use the
procedure above to perform synchro-recording with
a Sony video CD player.
Press number button 2 on the remote while pressing
down
?/1
on the remote. You can now operate the
MD deck and the video CD player with the remote.
To control the CD player again, press number button
1 on the remote while pressing down
?/1
on the
remote.
Notes
•
When performing CD Synchro-recording with a CD
player with a mode selector, be sure to set the
selector to CD1.
•
When you record tracks from certain CD or multi-
disc players, the entire material may be recorded as a
single track.
To
Press
Stop recording
CD-SYNCHRO STOP on
the remote
Pause recording
CD-SYNCHRO STANDBY
on the remote
Locate the next track to
be recorded during
recording pause
CD PLAYER
.
/
>
on
the remote
Resume recording after
pausing
CD-SYNCHRO START on
the remote
Check the remaining
recordable time on the
MD
DISPLAY
Press
To change the
deck to
And change the
CD player to
H
Recording
Play
x
Recording pause
Stop
X
Recording pause
Pause
