35
To set the AE level using the [Exposure] setting
in the [Picture] menu
In [Picture] menu’s [Exposure] > [Mode], select
[Auto], and then set [Auto Exposure Level].
Press the
B
/
b
buttons to set the value on the slider
that appears.
The gray circle on the slider indicates the setting
value before the change, and the blue circle
indicates the current setting value.
Tip
When a slider is displayed, holding down the
B
/
b
buttons increases the incremental speed at which
the value changes, allowing you to set your target
value faster.
By turning the
BRIGHTNESS knob with the
AE function off, you can adjust the brightness
with a combination of gain and shutter speed
settings. Turning the knob clockwise will
brighten the image (higher gain or a slower
shutter speed), and turning it counterclockwise
will darken the image (lower gain or a faster
shutter speed).
You can reset the AE level to factory default
settings by holding down the
BRIGHTNESS
knob for one second or longer.
To output a still image
Press the
FREEZE button on the CCU front
panel to output camera images as a still image.
When still image output is enabled, the
FREEZE button lights.
To return to normal picture
Press the
FREEZE button again.
Tips
• Adjustments to image quality settings may be
made in the [Picture] menu during still image
output, however, these changes will not be
reflected in the still images. Once you switch
back to normal picture, the image quality
changes can be checked.
• During still image output, effects will not be
reflected when switching Picture Profiles. Once
you switch back to normal picture, Picture
Profile changes can be checked.
• Color bar output will be disabled when you
switch to still image output.
Using the BRIGHTNESS knob
Outputting a Still Image
FREEZE button
