27
Camera picture output is output from all of the
video output connectors (VIDEO, S VIDEO,
HDMI, SDI) on the rear CCU panel.
You can check the camera picture output by
connecting a video monitor that supports the
respective video output to any of these
connectors.
Both sides of an SD image are cut from a 16:9
image and output as a 4:3 image.
Notes
• Before connecting the cables, make sure that the
unit is turned off.
• When connecting video monitors, only do so
using a direct cable. Using a conversion adapter
may cause the camera picture output to output
incorrectly.
Connecting Video Monitors
Video Monitors
S VIDEO IN
a) 75
Ω
coaxial cable
b) HDMI cable
c) S connector cable
Note
We recommend using Sony HDMI cables (not supplied).
b)
c)
CCU
HDMI IN
SDI IN
VIDEO IN
VIDEO OUT
S VIDEO OUT
SDI OUT
HDMI OUT
a)
a)
