2-6 (E)
MAV-70
Installation procedures
1.
Insert a new HDD unit into the slot gently, and press
the levers in the direction of the arrows to lock the
HDD unit.
n
Install the HDD with its CAUTION label facing up.
2.
Attach the HDD No.label which has same number as
removed HDD to the front of the new HDD unit.
.
HDD No. label : 3-605-401-01
3.
See the LCD display, and make sure that the status is
“Stp”.
4.
Install the front panel (lower). (Refer to the Section
1-7.)
Starting the HDD
Set the menu select cursor to “Start”, and press the ENTER
key.
The drive will start, and a rebuild operation is automatical-
ly executed when spin-up of the drive is completed.
n
The menu “Service : Disks : Exchange” also enables you
to stop or start up a HDD. The menu “Service : Disks :
Exchange” is used to stop a HDD without “Req” (drive
exchange request).
Select and stop a HDD with extra care. If two or more
HDDs are selected, recording/playback may be disabled.
With a rebuild request for HDD has been generated, if
other HDD is stopped, recording/playback may be dis-
abled.
Exit
Disks : Exchange
>Stop
Start
Stp Rdy Rdy Rdy Rdy Rdy Rdy Rdy
*
1
*
-2- -3- -4- -5- -6- -7- -8-
>Exit
Service : Disks
: Exchange
Mark
Stop
Start
Rdy Rdy Rdy Req Rdy Rdy Rdy Rdy
*
1
*
-2- -3-
*
4
*
-5- -6- -7- -8-
Exit
Disks : Exchange
Stop
>Start
Stp Rdy Rdy Rdy Rdy Rdy Rdy Rdy
*
1
*
-2- -3- -4- -5- -6- -7- -8-
2-5. HDD Unit Replacement
Levers
HDD No. label
HDD unit
CAUTION
label
