1 (P)
PRECAUTIONS
Use the specified power cord only
Use of power cords other than the specified ones may
cause fire or electric shock.
Do not damage the power cord
A damaged power cord may cause fire or electric shock.
When mounting the unit in a rack, be careful not to
catch the power cord in the rails.
Do not install the unit in humid or dusty locations
Dust, soot, and oil particles in the ambient atmosphere
may cause fire or electric shock.
Read the instructions and mount only as directed
The total weight of this unit is 44 kg.
Read the instructions and cautions in the manual and
mount only as directed to avoid the risk of injury. (Refer
to “1-6. Rack Mounting”.)
Do not block the ventilation slots
If the ventilation slots are blocked, overheating inside
the unit may cause fire. Observe the following points to
ensure adequate ventilation.
.
Do not install in narrow or sealed locations.
.
Remove dust from the fan and air filter.
Install in a stable location
Installation in an unstable place may cause the unit fall,
resulting in injury.
Do not stack the units
Do not stack two or more units on top of each other.
Mount in a rack to avoid the risk of the unit sliding and
causing injury.
Ground the unit safely
Failure to ground the unit may cause electric shock.
Handling the unit with the handgrip
Handling the unit without the handgrip may cause the
unit fall off, resulting in injury.
Carry the unit with more than two persons
The total weight of this unit is 44 kg.
Carrying the unit with less than two persons may cause
injury.
Mount with more than two persons
The total weight of this unit is 44 kg.
Mounting the unit with less than two persons may cause
injury.
Mount only with the specified support angles
Support angles other than those specified for this unit
may not be strong enough to support the unit, risking
possible collapse and injury.
Secure the unit to a rack with the screws
If the unit is not secured completely, this may cause the
unit fall off, resulting in injury. Be sure to secure the unit
with the screws when mounting to the rack. (Refer to “1-
6. Rack Mounting”)
Supply power of the specified voltage
The specified voltages are indicated on the unit. Use
with other voltages may cause fire or electric shock.
Secure the power supply unit with the screw
If the power supply unit is not secured completely, the
contact resistance of the power connector will be
increased and it may cause the risk of parts damage or
smoking.
Do not turn on the power until the power supply unit can
be secured completely.
