1-10 (E)
MAV-70
1-7. Front Panel Removal/Installation
1-7. Front Panel Removal/Installation
n
Be sure to put on the earth-band to establish a ground when
removing/installing the ornamental panel A and the front
panel (lower) during the power on. If not, this may cause
malfunction.
Ornamental Panel A Removal
1.
Loosen the two screws (with stoppers) on the orna-
mental panel A.
2.
Remove the ornamental panel A.
RK 4
x
20
RK 4
x
20
Shield foam
Shield plate
Ornamental panel A
Ornamental panel A
Ornamental Panel A Installation
1.
Attach the ornamental panel A to the unit as shown in
the figure, and tighten the two screws. At this time,
press the shield plate against inside of the unit to avoid
the shield foam from peeling off.
Front Panel (Lower) Removal/Installation
1.
Loosen the two screws (with stoppers) on the front
panel B.
2.
Remove the front panel (lower) while pushing the
panel brackets between the ornamental panel C and
front panel B.
3.
For installation, perform the removal procedures in
reverse order.
RK 4
x
20
RK 4
x
20
Ornamental panel A
Front panel (lower)
RK 4
x
20
RK 4
x
20
Panel
bracket
Ornamental
panel C
Panel
bracket
Front
panel B
