1-9 (E)
MAV-70
5.
Secure the outer support assemblies to the rack
temporarily with the screws and plate nuts.
6.
Tighten all the screws loosened in step 4 and tempo-
rarily secured in step 5.
7.
Mount the unit into the rack so that the inner support
angles are on the outer support angles.
c
Be sure to mount the unit with more than the two
persons to avoid back injuries and prevent the unit
from falling.
8.
Fix the rack angles onto the rack with ornamental
washers and screws supplied with the unit.
c
Secure the rack angles to the rack with the screws.
Otherwise the unit may slide and fall off, resulting in
injury.
1-6. Rack Mounting
Bracket
Inner support
Outer support
Rack side
Body
RK 5
x
14
RK 5
x
14
Ornamental
washers
Unit : mm
B4
x
12
Plate nut
12.7
The protruded side
must be positioned
on the top.
Bracket
Outer support
Rack side
