Chapter 6: Additional Features
EN
24
continued
➔
3
Press TIMER SET.
“SELECT TIMER” appears in the
display.
4
Press DAILY 1 or DAILY 2.
“ON” and the timer indication appear
and the hour digits flash in the display.
5
Press
“
or
”
(CURSOR CONTROL) to
set the hour you want the system to turn
on, then press ENTER/NEXT.
Set the minutes in the same way. “OFF”
appears and the hour digits flash in the
display.
6
Press
“
or
”
to set the hour you want
the system to turn off then press
ENTER/NEXT.
Set the minutes in the same way.
7
Press
“
or
”
to select a sound source.
The display changes as follows:
8
Press ENTER/NEXT.
The preset items appear in order in the
display.
9
Press SYSTEM POWER to turn off the
system.
The power will turn on at the preset
time and the music will play with the
volume you have adjusted.
At the turn-off time, the power will go
off again.
To change the preset timer settings
Start over from step 1.
To check the preset timer settings
1
Press DAILY 1 or DAILY 2 which ever
you have set once.
2
“TIMER OFF” appears in the display.
3
Press DAILY 1 or DAILY 2 again.
The preset items appear in order in the
display, then “DAILY 1 ON” or “DAILY
2 ON” appears in display.
To change the timer
Press the desired timer button.
To cancel the timer
1
Press DAILY 1 or DAILY 2 which ever
you have set once.
2
“TIMER OFF” appears in the display.
Notes
• You cannot set DAILY 1 and DAILY 2 at
the same time.
•You cannot set timer if the timer on and
off times are the same.
•When you set the sleep timer, daily timer
does not turn on until the system turns off
by the sleep timer.
•You cannot activate daily timer and
recording timer at the same time.
Timer-Recording
Radio Programmes
You can set the timer to record the radio.
This timer works only once for each setting.
The volume level is automatically set to the
minimum.
Make sure the clock has been set correctly
and preset the station beforehand. (See
“Presetting Radio Stations”).
1
Press TUNER/BAND repeatedly until
the band you want appears in the
display.
2
Press TUNING MODE repeatedly until
“PRESET” appears in the display.
3
Press /– button (or
/
on the remote) to tune in a preset station.
4
Press TIMER SET.
“SELECT TIMER” appears in the
display.
5
Press REC.
“ON” appears and the hour digits and
“AM” flash in the display.
6
Set the hour you want to start recording
by pressing
“
and
”
( CURSOR
CONTROL), then press ENTER/NEXT.
Set the minutes in the same way.
“OFF” appears and the hour digits flash
again.
7
Set the hour you want to stop recording
by pressing
“
and
”
( CURSOR
CONTROL), then press ENTER/NEXT.
Set the minutes in the same way.
The preset items appear in order in the
display.
8
Insert a tape in deck B with the side you
want to record facing forward.
Recording always starts from the front
side. If necessary select the direction
mode. You can use TYPE I (normal) or
TYPE II (CrO
2
) tapes.
9
Press SYSTEM POWER to turn off the
system.
The power will turn on at the preset time
and the recording will start with the
minimum volume level automatically.
At the turn-off time, the power will go
off again.
To cancel the timer settings
Press REC so that “TIMER REC”
disappears from the display. Press REC
again to activate the timer.
To check the timer settings
Press REC twice in succession.
To change the timer settings
Repeat step 1 to 9.
Notes
•
The band and station will be recalled as
you have set them, but the recording does
not start if the system power is on.
•
You cannot activate recording timer and
daily timer at the same time.
flashing
flashing
flashing
5
8
4
3
6,7
3
1
flashing
6,7
1
2
CLIP
VOLUME
TIMER
DAILY1
CLIP
VOLUME
TIMER
DAILY1
TUNER
CD
TAPE
CLIP
63
4k
8k
16k
(Hz)
TUNER
VOLUME
TIMER
DAILY1
SYSTEM
POWER ON
CLIP
1
TUNER
VOLUME
TIMER
REC