Chapter 4: the Tape Player
EN
19
1
Press FUNCTION repeatedly until
“TAPE” appears in the display.
TAPE is selected.
2
Press
§
EJECT and insert a recorded
tape in deck A with the side you want to
play facing forward.
Also, insert a blank tape in deck B with
the side you want to record on facing
forward.
Recording and playing will start from
the front side of the tape, unless you
have changed the playing direction
before recording.
Make sure the tabs on the cassette in
deck B have not been removed.
3
Select dual or single-sided recording.
* Recording always stops at the edge of the
end of the reverse side. Be sure to start
from the front side.
4
Press REC.
The REC and
∏
(pause) lamps light up
and deck B stands by for recording.
The
·
lamp lights and the
ª
lamp
flashes for a few seconds, then
disappears.
If you want to start recording from the
reverse side, press
·
so that the
ª
lamp lights steadily.
5
Press
∏
on the tape player to release
recording pause on deck B.
Recording starts on deck B.
If you set DIRECTION to
ß
or
RELAY, recording always stops at the
end of the reverse side.
6
Press
ª
or
·
.
The tape on deck A starts playing.
To stop dubbing
Press
π
on DECK A or DECK B.
Note
Do not use the microphone while dubbing.
4
Press HIGH SPEED DUBBING.
The REC and
∏
(pause) lamps light and
deck B stands by for recording.
The
·
lamp lights and the
ª
lamp
flashes for a few seconds, then
disappears.
If you want to start recording from the
reverse side, press
ª
so that the
ª
indicator lights steadily.
5
Press
∏
on the tape player.
The tape player starts dubbing at high
speed.
If you set DIRECTION to
ß
or
RELAY, recording always stops at the
end of the reverse side.
To stop dubbing
Press
π
on DECK A or DECK B.
If you select another sound source while
dubbing
Dubbing stops.
Dubbing Another Tape
Manually
When you want to dub only part of the
tape, dub manually at normal speed. Use
the buttons on the unit and TYPE I (normal)
or TYPE II (CrO
2
) tape for recording.
Operation
Dubbing stops at the end of
one side
When the tape in one deck
comes to the end of the front
side, it reverses immediately
regardless of the tape
position in other deck.
When the tape in one deck
reaches its end of the front
side, it stops until the other
tape come to its end, and
then both tapes reverse
together.
Position
A
ß
RELAY
Side in recording
pause mode
1
2
3
5
4
2
6
π
To dub
One side of the tape
Both sides*
Set DIRECTION to
A
ß
or RELAY
Side in recording
pause mode
π
SYSTEM
POWER ON
