![background image](http://html.mh-extra.com/html/sony/lbt-g200k/lbt-g200k_operating-instructions-manual_1329847004.webp)
Chapter 1: Setting Up
EN
4
FM 75
AM
FM 75
AM
Chapter 1:
Setting
Up
Connecting the
Stereo
Use the illustrations below to connect your
stereo.
If you want to connect any optional
components to the stereo, see “Connecting
Optional Equipment” in Chapter 6.
STEP 1
Connecting the
Speakers
1
Twist the speaker cable coating and
strip it from the end of the cable.
2
Connect the right speaker to R
connectors and the left speaker to L
connectors with the red cords to + and
the black cords to –.
To improve the AM reception
After you connect the AM aerial, connect a
6- to 15- meter (20- to 50- feet) insulated
wire to the AM terminal. Connect the
y
terminal to ground.
Important
Ground the external aerial from
y
terminal
against lightning with the screw clamp. To
prevent a gas explosion, do not connect the
ground wire to a gas pipe.
Connecting the Stereo
Inserting the Batteries
Setting the Clock
75-ohm coaxial cable
(not supplied)
Ground wire
AM loop aerial (supplied)
STEP 2
Connecting the
Aerial
*
Note: Extend it horizontally
To improve the FM reception
Connect an outdoor FM aerial to the FM
75Ω terminal, using a 75-ohm coaxial cable.
Important
Ground the external aerial from
y
terminal
against lightning with the screw clamp. To
prevent a gas explosion, do not connect the
ground wire to a gas pipe.
FM wire aerial
*
(supplied)
Ground wire
Insulated wires (not
supplied)
screw
clamp
STEP 3
Adjusting the
Operating Voltage
Before connecting the power, set
VOLTAGE SELECTOR to the position of
the local power line voltage.
red
black
L
FM 75
AM
screw
clamp
VOLTAGE SELECTOR
110-120V
220-240V