![background image](http://html.mh-extra.com/html/sony/lbt-g200k/lbt-g200k_operating-instructions-manual_1329847013.webp)
EN
13
Chapter 4: the Tape Player
1
Press FUNCTION on the remote
repeatedly until “CD” appears in the
display.
2
Press
§
OPEN/CLOSE and place a CD.
Then, press
§
OPEN/CLOSE again to
close the tray.
Total number of tracks and the total
playing time appear in the display.
3
Press
p
/
6
and insert a blank tape into
deck B with the side you want to record
on facing forward.
Make sure the tabs on the cassette have
not been removed.
4
Press TAPE SELECT to select tape type I
or II.
5
Press EDIT on the remote once. “TIME
EDIT” appears in the display.
6
Press
≠0
or
)±
to designate
the tape length or “HALF”.
Choose the indicator for tapes of
corresponding minute length.
Choose “HALF” if you want the CD
player to play just half the total playing
time of the CD. You cannot select
“HALF” when you want to record CD
which has more than 20 tracks.
5,7,8
CHECK
CONTINUE
1
4
3
6
10
12
2
9
7
Press EDIT.
The player determines the tracks to be
recorded on side A automatically .
8
When you record on both sides, press
EDIT again.
The player determines the tracks to be
recorded on side B.
9
Press
r
REC.
Recording starts.
10
Press CD
·
.
CD player plays the tracks to be
recorded on side A and then pauses.
11
Set the tape to the begining of side B,
then press
r
REC.
12
Press
P
or CD
·
on the CD player.
CD player starts playing the tracks to be
recorded on side B.
To stop recording
Press
p
/
6
.
To check the order
Press CHECK repeatedly.
To select the desired tracks
beforehand
You can place priority on some tracks to be
recorded by selecting them before
programming them up to 20 tracks. See
“Playing Tracks in the Desired Order
(programme play)”.
If you have programmed a track number
which exceeds 20, you cannot use this
feature.
To cancel time edit
Press CONTINUE.
As you press the button, the indicator
changes as follows:
-- . --
HALF
C-46
C-54
C-90
C-74
C-60
(23.00) (27.00)
(37.00) (30.00)
(45.00)
flashing
Total playing time on side A
Tracks to be recorded on side A
Tracks to be recorded
on both sides
Last track
Total playing time
on side B
1
Press
§
OPEN/CLOSE and place a CD.
Then, press
§
OPEN/CLOSE again to
close the tray.
Total number of tracks and the total
playing time appear in the display.
2
Press
p
/
6
and insert a blank tape into
deck B with the side you want to record
on facing forward.
Make sure the tabs on the cassette have
not been removed.
3
Press TAPE SELECT to select tape type I
or II.
4
Press FUNCTION on the remote
repeatedly until “CD” appears in the
display.
5
Press
r
REC.
Recording starts.
6
Press CD
·
.
The CD player starts playing.
You can play CD after programming
(See “Playing Tracks in the Desired
Order (programme play)”).
Adjusting the volume or DBFB will not
affect the recording level
But these controls will change the sound
levels you hear through speakers or
headphones.
Notes
•
Make sure the tape player stops when
you turn off the unit.
•
Turn the audio emphasis off when the
sound level of the CD you want to record
is very high, because it may distort the
recording sound.
Recording a CD:
Specifying Tape
Length (time edit)
You can have the stereo system create
programmes based on tape length.
The CD player makes programmes that will
fit the tape length. For example, if you use a
46-minute tape to record a 50-minute CD,
the CD player will automatically choose
tracks that will fit within the 46-minutes,
filling as much of the tape as possible. The
player will not programme those tracks
beyond track number 20.
To
Stop recording
Pause recording
Press
p/6
P
PAUSE
SYSTEM
POWER – ON