– 67 –
KP-FR43M31/FR43M91
RM-GA001
3-12. REGISTRATION ADJUSTMENT
3-12-1. Adjustment Flow
3-12-2. Setup for Adjustment
1. Marking
1. At the 4 insides of the screen, locate the middle. Use a
tape measure to identify the middle.
3-12-3. Method of Main Deflection Adjustment
1. Place the caps on the red and blue lenses so that only
the green color is displayed.
2. Enter the PAL SPCB signal, and set the DRC1250.
3. Set in the Service mode, and select the category
“DEF1”, “DEF2”.
4. Adjust “00 VPOS” in “DEF1” so that the picture is
displayed in the center of screen.
00 VPOS
5. Adjust “01 VSIZ” in “DEF” and “02 HSIZ” “DEF2” so that
the picture size is within the specification.
01 VSIZ
02 HSIZ
SPECIFICATION:
Overscan Spec. = 0.9%
Input Signal
H SIZE
V SIZE
PAL SPCB
16.4 ± 0.1 sq.
12.3 ± 0.1 sq.
START
Turn on the power and wait for 10 minutes
Set to the PAL Full mode
Check the deflection yokes, the centering magnets, 2 pole/4 pole magnets
Set to the service mode
MAIN DEFLECTION ADJUSTMENT ( Green)
Green coarse adjustment
Green fine adjustment
Red coarse adjustment
Red fine adjustment
Blue coarse adjustment
Blue fine adjustment
Another display mode ?
Memorize the FLASH FOCUS offset data
50 Hz and 60 Hz
End
SUB DEFLECTION
ADJUSTMENT
Change the
display mode
YES
ALLCOPY
NO
X : middle
x
x
x
x
Summary of Contents for KP-FR43M31
Page 126: ... 153 KP FR43M31 FR43M91 RM GA001 TL1431CZ AP STK394 510 n IC ...
Page 165: ...2 ...
Page 200: ...2 ...