Sony KP-FR43M31, Service Manual

Page: 15 / 230

– 14 –
KP-FR43M31/FR43M91
RM-GA001
3-10-2. Method of Cancellation from Service Mode
1. Set the standby mode (Press “ ! /1 (TV STANDBY)”
button on the commander), then press “
!
/1
(TV STANDBY)” button again, hereupon it becomes TV
Mode.
3-10-3. How to Adjustments
1. Set in the service mode, the following screen will
appear.
2. Press “
1
” or “
4
” button on the commander to select the
adjustment item.
3. Press “
3
” or “
6
” button on the commander to change
the adjustment data.
4. Move “ ” up or down to select the adjustment category.
When move “ ” up (category up), service mode
changes in the order as shown below.
* : When it moves from PJE to other categorys,
repeat
1
or
4
button and press it.
SERVICE 60 CH 6 32 0 OSD OSV
000Q 3.1M 0010 0000 20 00 00 0000
Category Name Item Name Mode
Item No. Data
Suffix No.
Total Power On time
(Hours)
Software
Version
50 : PAL, SECAM
60 : NTSC
PIC
SOU
DRC
LUMA
YCTM
YCTS
YCTC
MCP
MID1
VSW
MID3
MID2
PFOP
PFID
AP
GRN
PJE *
DDEV
COLR
CLTY
DEF1
DEF2
CRNR
RNR
MSMO
POWR
GUID
MIDE
CCPM
COMB
DEF3
DEF4
DEF5
BNR
SNNR
AWID
OSDP
ASEL
VSEL
OPM
OPB
SRV
OSD
MSP
TEXT
3-10-4. How to Write the Data
1. Set in the service mode.
2. Press “
1
” or “
4
” button on the commander, select the
adjustment item, and press “
3
” or “
6
” button to change
the data.
3. Press “ % (MUTE)” button on the commander and it will
indicate “WRITE” on the screen.
4. Press “
-
” button on the commander to write into
memory. (The “WRITE” display will be changed to red
color while executing, and back to “SERVICE”.)
Commander Function (Except PJE mode)
Button Mode Description
%
+
-
WRITE Writes data to NVM.
7
+
-
READ Reads data from NVM.
8
+
-
NORMAL All user control goes to the
standard.
5
+
-
INITIAL Service data initialization.
Not stored.
(Be sure not to use usually)
2
+
-
COPY Do not operate with a remote
commander.
+
-
WRT5060 (The data vary with among
mode.)
Note : Before changing to other modes, press “ % (MUTE)”
+ “
-
” buttons on the commander to write the data.
(Omission of this operation causes the data to be
returned to the data before adjustment.)
: Confirm the adjustment mode before writing data for
data values because to vary in each adjustment
mode.
: The adjustment item that there are no relations in the
adjustment is not to change data values because all
items are written in each adjustment mode.
3-10-5. Memory Write Confirmation Method
1. After adjustment, turn off the AC main power switch off.
2. Turn the power switch ON and set in the service mode.
3. Call the adjustment items again to confirm adjustments
were made.