manualshive.com logo in svg

Sony KP-44PX2, Service Manual

Share
Download
Sony KP-44PX2 Service Manual Download Page 21

– 21 –

KP-44PX2/44PX2U

RM-938

4-5. 2-POLE MAGNET ADJUSTMENT

1.

Receive the Dot signal.

2.

Place the caps on the red and blue lens so that only the
green color is shown.

3.

Turn the green focus VR on the focus pack to the right and
set to over focus to enlarge the spot.

4.

Now align the 2-Pole Magnet so that the enlarged spot is in
the center of the just focus spot.
(center of the dot doesn't move)

5.

Align the green focus VR and set for just (precise) focus.

6.

Perform the same alignment for red and blue.

Fig. 4-6

4-6. 4-POLE MAGNET ADJUSTMENT

1.

Receive the Dot signal.

2.

Place the caps on the red and blue lens so that only the
green color is shown.

3.

Turn the green focus VR on the focus pack to the left and
set to under focus to enlarge the spot.

4.

Now align the 4-Pole Magnet so that the enlarged spot
becomes a perfect circle.

5.

Perform the same alignment for red and blue.

Fig. 4-7

Fig. 4-8

Adjust Point

Use the center dot

Use the center dot

OK

NG

NG

4-7. GREEN, RED AND  BLUE FOCUS

     ADJUSTMENT

4-7-1. Green, Red and Blue Lens Focus
          Adjustment

1.

Receive the Monoscope signal.

2.

Place the caps on the red and blue lens so that only the
green color is shown.

3.

Rotate the green lens and adjust to obtain the best lens
focus at the center area.

4.

Fix lens screw.

5.

Repeat above process for red and blue.

4-7-2. Green, Red and Blue Electrical Focus

Adjustment

1.

Receive the Monoscope signal.

2.

Place the caps on the red and blue lens so that only the
green color is shown.

3.

Rotate the green focus VR on the focus pack and adjust
to obtain the best electrical focus at the center area.

4.

Repeat above process for red and blue.

Summary of Contents for KP-44PX2



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands