Getting Started
6
Getting Started
1.
When you switch on the TV for the first time a menu appears on the
screen asking you to check if the picture is slanted. (Sometimes the
Earth’s natural magnetism can cause the screen to look slanted.)
a) If no correction is required,
press the
V
or
v
button to highlight ‘Not
necessary’. Press the
OK
button to continue.
b) If some correction is required
, press the
V
or
v
button to highlight
‘Adjust now’. Press the
OK
button to continue. Press the
V
or
v
button
to correct the slant. Press the
OK
button to store.
2.
The autotune prompt appears. Press the
OK
button to select ‘Yes’. The
autotune procedure begins.
The digital autotune display appears on screen and the TV starts to
search for all the available digital channels. This may take some time,
please be patient and do not press any buttons on the TV or remote
control.
If no digital or analogue channels are found, a message appears asking
you to confirm that the aerial is connected correctly. Check all the aerial
connections and press the
OK
button to start the autotune procedure
again.
When the digital autotune is complete, the analogue autotune starts to
search for all the available analogue channels.
Once all available digital and analogue channels have been stored, the
TV returns to normal operation, displaying the digital channel stored on
channel number 1. If no digital channels are found, the analogue channel
stored on channel 1 is displayed.
The TV has now tuned
in all the available channels
1.
Press the
DIGITAL/
a
button to switch between digital and analogue
mode.
In digital mode
, an information banner appears briefly on screen when
the channel is changed.
In analogue mode
, the channel number appears in green lettering when
the channel is changed.
Automatically tuning the TV
5
Switching between digital and analogue mode
6
The ‘Picture Rotation’ menu.
The ‘Autotune’ prompt.
Do you want to start
automatic tuning?
Yes
No
OK
If picture slants, please
adjust picture rotation
Not necessary
Adjust now
OK
2832DX50U.book Page 6 Monday, July 14, 2003 10:35 AM
