46
Adjustment
Registering and Recalling the Unit/Cell Numbers
The JME-SA200 can register up to 256 unit/cell numbers to be stored in
memory. This function is useful especially when you check the unit or cell
to be adjusted or replaced and note its number.
When recalling a registered unit or cell, the indicator on the rear panel of
the corresponding unit flashes. It is convenient when you inspect or
replace the unit from the back of the screen.
Registering the unit/cell number
1
Establish communication with the ICU controller (page 21) and
display the MAIN MENU.
2
Press the
v
or
V
button to select SCREEN UNIT CONTROL and press
the ENTER button.
The SCREEN UNIT CONTROL menu appears.
S W I T C H E R C O N T R O L
S I G N A L C O N T R O L
G E O M E T R Y C O N T R O L
M O N I T O R C O N T R O L
S C R E E N C O N T R O L
S C R E E N U N I T C O N T R O L
O T H E R C O N T R O L
* * * * * * M A I N M E N U * * * * * *
* S C R E E N U N I T C O N T R O L *
C H E C K
A D J U S T
R E G I S T
R E C A L L
F A C T O R Y D A T A
3
Press the
v
or
V
button to select REGIST and press the ENTER button.
The SCREEN UNIT/REGIST menu appears.
* S C R E E N U N I T / R E G I S T *
M O D E : W H I T E
C O N T R A S T : 1 5
U N I T N U M B E R C E L L N o .
X Y Z P X P Y
1 / 1 / 1 0 / 0
4
Press the
v
or
V
button to select MODE and press the
B
or
b
button to
select the display mode during registration.
Select the display mode in which you can easily identify the unit.
By pressing the
b
button, the display mode changes in the order shown
in the following table. By pressing the
B
button, they are selected in
the reverse order.
* S C R E E N U N I T / R E G I S T *
M O D E :
W H I T E
C O N T R A S T : 1 5
U N I T N U M B E R C E L L N o .
X Y Z P X P Y
1 / 1 / 1 0 / 0
Display mode
Display on the screen
WHITE
The whole screen turns to white and the specified unit
or cell flashes.
CUT OFF
The whole screen turns to black and the specified unit
or cell flashes.
FRAME
The frame of the specified unit (that is, the outmost
dots around the unit) lights.
You cannot specify the cell in this mode.
Display mode
