Adjustment
37
Checking the Screen Display Unit
You can display the test patterns automatically and repeatedly on a
specified screen display unit to check if the unit is operating properly.
This function is useful when checking on the cause of a malfunction of the
unit, or after adjusting, repairing or replacing the unit.
1
Establish communication with the ICU controller (page 21) and
display the MAIN MENU.
2
Press the
v
or
V
button to select SCREEN UNIT CONTROL and press
the ENTER button.
The SCREEN UNIT CONTROL menu appears.
S W I T C H E R C O N T R O L
S I G N A L C O N T R O L
G E O M E T R Y C O N T R O L
M O N I T O R C O N T R O L
S C R E E N C O N T R O L
S C R E E N U N I T C O N T R O L
O T H E R C O N T R O L
* * * * * * M A I N M E N U * * * * * *
* S C R E E N U N I T C O N T R O L *
C H E C K
A D J U S T
R E G I S T
R E C A L L
F A C T O R Y D A T A
3
Press the
v
or
V
button to select CHECK and press the ENTER button.
The SCREEN UNIT/CHECK menu appears.
* S C R E E N U N I T
/
C H E C K *
M O D E : T E S T
U N I T N U M B E R
X : 1 Y : 1
S C R E E N N U M B E R : 1
4
If two or more screens are installed, select the screen number.
Press the
v
or
V
button to select SCREEN NUMBER and press the
B
or
b
button to change the number.
* S C R E E N U N I T
/
C H E C K *
M O D E : T E S T
U N I T N U M B E R
X : 1 Y : 1
S C R E E N N U M B E R :
1
Note
If only one screen is installed, do not change SCREEN NUMBER from 1.
If a number other than 1 is set, the test pattern cannot be displayed even if
you assign the unit number correctly.
(continued)
Screen number
