Ot
he
rs
When using Windows XP Service Pack 2
52
Configuring Windows Firewall
The IP Setup Program may not operate correctly
depending on the configuration of Windows Firewall.
(No cameras are shown in the list even if they are
detected.) In this case, confirm the Windows Firewall
configuration as follows:
Example: In case of IP Setup Program
1
Select
Control Panel
from the Start menu of
Windows.
2
Select
Security Center
of the working field.
3
Select
Windows Firewall
and select
Off
in the
Windows Firewall dialog.
The cameras will be displayed in the list.
If you want to keep Windows Firewall
On
, continue
with the following steps.
4
Select the “Exceptions” tab.
5
Select
Add Program…
.
6
In the Add Program dialog, select
IP Setup
Program
and click
OK
.
Then the IP Setup Program is added to the
Programs and Services list.
7
Click
OK
.
When the above procedure is completed, the
cameras connected in the local network are
displayed in the IP Setup Program.
