Sony IPELA SNC-DM110, Service Manual

Page: 17 / 80

2-5
SNC-DS10/DM110
2-2-3. Setup Level Adjustment
.
Subject: None
.
Measuring equipment: Waveform monitor
.
Specification: NTSC: A = 7.5
±
2 (IRE)
PAL: A = 0
±
14 (mV)
1. Operate the spin box while checking the waveform
monitor to adjust the level to the specification A.
2. Click the
[OK]
button.
3. Check that “OK” is displayed in the upper right area of
the window, and then click the
[Next]
button.
2-2-4. Burst Level Adjustment
.
Subject: None
.
Measuring equipment: Waveform monitor
.
Specification: NTSC: B = 40
±
2 (IRE)
PAL: B = 280
±
14 (mV)
1. Operate the spin box while checking the waveform
monitor to adjust the level to the specification B.
2. Click the
[OK]
button.
3. Check that “OK” is displayed in the upper right area of
the window, and then click the
[Next]
button.
A
Spin box
B
Spin box