Sony Ipela NSR-1100, Installation Manual

Page: 25 / 336

Step 3: Settings
25
The cameras are registered.
↓
To configure alarm recording
Select [Automatic Alarm Record], and click [Next].
↓
A confirmation screen appears.
Click [Next}.
↓
Verify configurations, and click [Finish].
↓
Alarm recording starts.
When configuration is complete, the “Main” screen
appears.
After performing basic configuration, the values for
each setting will be as follows.
1) If the user has not configured storage location settings for
the camera, the capacity on the first partition of the unit’s
internal hard disk is used to calculate other settings. If the
user has configured storage location settings, the capacities
for each of the locations are used to calculate other settings.
Setting Scheduled
recording Alarm recording
Image size Maximum image size supported by the camera.
Codec Codec that supports the maximum image
size.(If supported by both JPEG and MPEG4,
MPEG4 is selected.)
Frame rate JPEG:
Depends on storage
duration for
recorded data.
MPEG4:
Depends on bitrate.
JPEG: 10 fps
MPEG4: 10 fps
Quality 50%
Level 3 (cameras
with 5 level
settings)
Level 5 (cameras
with 10 level
settings)
80%
Level 5 (cameras
with 5 level
settings)
Level 8 (cameras
with 10 level
settings)
Bitrate Depends on storage
duration for recorded
data. MPEG4: 1.5 Mbps
Recording
trigger – VMD (Camera)
VMD (Recorder)
JPEG: Standard
mode
MPEG4: High-
performance
mode
Data storage
location Not changed from
existing
configuration.
1)
Not changed from
existing
configuration.
1)
Audio Disabled Disabled
Data overwrite Not changed from
existing configuration.
Not changed from
existing configuration.
Cleanup Deletes data that
exceeds storage
duration. Not changed from
existing configuration.