3-9
ILCE-7M3/7M3K
3-9. MECHA DEVICE SECTION
Note 1:
The imager may get structurally damaged from the
influence of static electricity. Protect against static
electricity and similarly take care when handling
the MOS IC.
Also, keep the receiver of the imager away from
debris and intense light.
Note 2:
The IM adjust washers differ in thickness. Make
sure to return the removed IM adjust washers to
original places.
Do not lose them.
front side
rear side
Refer to front cover block section.
Refer to MB N frame unit section.
409
407
408
406
405
410
404
404 411
not supplied
(Note 2)
not supplied
(Note 2)
not supplied
(Note 2)
Refer to anti shake unit section.
409
403
402
401
(Note 1)
412
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
401
A-2199-749-A SERVICE,MECHA DEVICE (5500) (Note 1)
402
4-685-116-01
AS GRAPHITE SHEET TOP (5300)
403
2-630-005-01
SCREW (M2), NEW TRUSTER, P2 (L = 5.0 mm)
404
3-091-481-31
SCREW (M1.7 X 4.0)
405
4-725-947-01
MB JACK SHIELD BLOCK (5400)
406
A-2189-047-B MB CHARGE UNIT (5400)
407
1-490-193-32
SHUTTER UNIT (AFE-3360)
408
4-185-990-01
MB SCREW, CHARGE UNIT FIXED (M1.6 X 4.5)
409
2-630-005-31
SCREW (M2), NEW TRUSTER, P2 (L = 4.0 mm)
410
4-729-131-01
MB JACK SB SHEET (5400)
411
2-599-475-51
SCREW (M1.7) (L = 6.0 mm)
412
4-729-002-01
MB CUSHION SHEET (5400)
SYS SET
2018/05/02 02:55:03 (GMT+09:00)
