2-35
ILCE-7M3/7M3K
5
hook
4
IM glass retainer plate block
7
Install the ISP-2008 flexible
board to two bosses.
8
Install the ISL-2009 flexible
board to two bosses.
ISP-2008 flexible board
ISL-2009 flexible board
3
Insert two pins (Ø 1.22 ± 0.01) into holes.
pin (Ø 1.22 ± 0.01)
1
IM imager block
spacer sheet
imager
top side
front side
optical filter block
optical filter block
optical filter block
optical filter block
imager side
mount side
6
three IM imager fix shafts (M1.7
u
4.5)
1P
Note 1:
When install the spacer sheet to the imager and the
optical filter block, install them so that the each
centers are matched and top and bottom right and
left become uniform.
Note 2:
When install the optical filter block to the imager,
confirm the mounting direction of the optical filter
block by shedding light from obliquely.
2
Insert the two flexible boards
into the hole of the TEX-5300.
TEX-5300
IR coated surface
AR coated surface
IR coated surface AR coated surface
,QVWDOODWLRQGLUHFWLRQIRUWKHRSWLFDOILOWHUEORFN
top side
rear side
Reflected in red
2-3-13. IM IMAGER BLOCK
SYS SET
2018/05/02 02:55:03 (GMT+09:00)
