Sony HT-NT3, Service Manual

Page: 24 / 96

HT-NT3
24
3. Service Mode Menu (Top Menu)
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1] Moves to Diag screen
[2] Moves to Log screen
[3] Moves to Factory Initialize screen
[4] Moves to Network screen
[5] Moves to Version Up (USB version update) screen
(Not used)
[6] Moves to System Information screen
[7] Moves to EMC test mode screen (Not used)
[8] Moves to Drive screen (Not used)
[9] Moves to HDD mode screen (Not used)
[10] Moves to RF Test Mode (Not used)
[
M
]/[
m
] Moves the cursor
[ ] Moves to the screen of the item selected with the cursor
* Cursor is not displayed when the menu is fi rst displayed.
* Service Mode Menu
[2] Log
[4] Network --> Not Support In This Model
[5] Version Up
[6] System Informa
Ɵ on
[7] EMC Test Mode
[8] Drive --> Not Support In This Model
[9] HDD mode
[10] RF Test Mode
HELP: [DOWN][ENT]
[3] Factory Initialize
[1] Diag
4. Diag (Device Test)
This screen is used to test devices mounted on the board.
Screen 1: Selects the test category
Operation:
[
<
]/[
,
] Selects the category
[
m
]/[ ] Moves to the selected category
[RETURN] Returns to the service top menu
Screen 2: Device test
Selects the device to test after selecting Device Test in screen 1.
Operation:
[
<
]/[
,
] Selects the device to test
[ ] Executes the test
[ M ] Returns to selection of test category
[RETURN] Returns to selection of test category
• List of test categories
Device Test
Video Test (Not used)
Audio Test (Not used)
Audio Input Test (Not used)
Wireless LAN Test
Mic Test (Not used)
HDMI Input Test (Not used)
Transcorder Test (Not used)
Bluetooth Device Test
Diag
Category:
Diag
Category: Device Test
Device:
Front USB Media check ... OK
Checking...
HELP: [RIGHT] [UP] [ENT] [RET]
USB Host
Device Test
(Screen 1)
(Screen 2)
• Device Test: List of devices
USB Host : USB media check (front). Only one time.
5. Diag (Wireless LAN Test)
This screen performs wireless LAN/Miracast test.
Screen 1: Selects Wireless LAN Test Category
Operation:
[
<
]/[
,
] Selects the category
[
m
]/[ ] Activate the selected category
[RETURN] Returns to service top menu
Screen 2: Selects Wireless LAN Test
Operation:
[1] Show Wireless LAN module Information (Not used)
[2] Connect to Access Point (Not used)
[3] Start display RSSI value (Not used)
[4] Start Ping Test (Not used)
[5] Write P2P Address to Registry
[6] P2P Registry Check
[ M ]/[ m ] Selects Test
[ ] Activate and Start Test
[RETURN] Returns to test category selection
Screen 2: Store P2P device address to Registry
Display will show : P2P device address : “xx:xx:xx:xx:xx:xx”
•
Viewing the Status display, if
Successful : “Write Successful!”
Fail: “Write Fail!”
Screen 3: P2P Registry Check
Show P2P device address “xx:xx:xx:xx:xx:xx”