Sony HT-NT3, Service Manual

Page: 21 / 96

HT-NT3
21
WIRELESS SOUND COLD RESET
It can initialize various backup information of Subwoofer (SA-
WNT3).
Preparation:
Connect the Bar Speaker (SA-NT3) and the Subwoofer (SA-
WNT3)
Procedure:
1. Press button in order of the [
x
]
→
[DISPLAY]
→
[BACK]
→
[
M
] on the remote commander.
2. The power indicator LED on the Subwoofer (SA-WNT3) turns
as below.
For secure link : orange (light up) -> red (fl ashing) ->
orange (light up)
For normal link : green (light up) -> red (fl ashing) ->
orange (light up)
Power indicator LED
3. Pull out the power cord on the Subwoofer (SA-WNT3) from
an outlet and insert the power cord again.
FACTORY INITIALIZE
Return all of the unit setting to their factory defaults.
Note 1:
Disconnect the following connections when you use this mode.
•
USB
Note 2: The operation in this mode must use a remote commander and TV
monitor.
Procedure:
1. Press the [
?/1
] button to turn the power on.
2. Press the [HOME] button on the remote commander, and the
home menu is displayed.
3. Select “Setup”
→
“Resetting”, and press the [ ] button on the
remote commander.
Resetting
Easy Network Settings
Easy Setup
Input Skip Setting
4. Select “Initialize Personal Information”, and press the [ ]
button on the remote commander.
Initialize Personal Information
Delete personal data when disposing
Reset to Factory Default Settings
5. Select “OK”, and press the [ ] button on the remote com-
mander.
Initialize Personal Information
OK Cancel
Deleting Personal Information.
Do you want to proceed?
If you destroy or transfer or resell this
unit, please delete all Personal Information
for security reasons.
Please take appropriate measures such as
logging out after using a network service.
6. The message “Close” appears, and press the [ ] button on the
remote commander.
Initialize Personal Information
Close
Initialization complete.