HT-CT380/CT381
25
2-14. User Update Mode
(It is displayed “UPDATE” on the
fl
uorescent indicator tube)
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
2-15. SW Distance Test Mode
(It is displayed “SW.DIST” on the
fl
uorescent indicator tube)
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
2-16. HDCP Key Read Mode
(It is displayed “HDCP” on the
fl
uorescent indicator tube)
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
2-17. NFC Test Mode
(It is displayed “NFC.TST” on the
fl
uorescent indicator tube)
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
2-18. Auto Standby Test Mode
(It is displayed “T. STBY” on the
fl
uorescent indicator tube)
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
2-19. Wireless Sound Test Mode
It can display the
-com version of Subwoofer (SA-WCT380/
WCT381).
Note :
More than one item may
be displayed on the
fl
uorescent indica-
tor tube
, but it is not used for the servicing other than “VER.CHE”.
Preparation:
• Prepare the remote commander (RMT-AH101U) attached to
this unit.
• Connect the Bar Speaker (SA-CT380/CT381) and the Sub-
woofer (SA-WCT380/WCT381) by wireless.
Procedure:
1. Enter the test mode menu.
(Refer to “Setting method of the test mode menu” on page 22)
2. Press the []/[VOLUME –] buttons to select the
“WS TST”, press the [INPUT] button.
3. The message “FACTRY” is displayed on the
fl
uorescent indi-
cator tube and enter the wireless sound test mode.
4. Press
the
[
V
]/[
v
] buttons on the remote commander, select the
“VER.CHE”, and press the [ENTER] button on the remote
commander.
5. The
-com version of Subwoofer (SA-WCT380/WCT381) is
displayed on the
fl
uorescent indicator tube.
(Displayed values in the above
fi
gure are example)
6. When [
V
]/[
v
] buttons on the remote commander is pressed
while the
-com version of Subwoofer (SA-WCT380/
WCT381) is displayed on the
fl
uorescent indicator tube, year,
month and day of the creation is displayed on the
fl
uorescent
indicator tube.
(Displayed values in the above
fi
gure are example)
When
[
V
]/[
v
] buttons on the remote commander is pressed
again, the display returns to the
-com version of Subwoofer
(SA-WCT380/WCT381) display.
Releasing method:
Press the [
?/1
] button to release the test mode menu.
2-20. Wireless Sound Cold Reset
It can initialize various backup information of Subwoofer (SA-
WCT380/WCT381).
Preparation:
Connect the Bar Speaker (SA-CT380/CT381) and the Subwoofer
(SA-WCT380/WCT381) by wireless.
Procedure:
1. Enter the test mode menu.
(Refer to “Setting method of the test mode menu” on page 22)
2. Press the []/[VOLUME –] buttons to select the
“WS RST”, press the [INPUT] button.
3. The on/standby indicator on the Subwoofer (SA-WCT380/WCT381)
turns red and
fl
ashes, then turns on yellow.
on/standby indicator
Red (flash)
t
Yellow (light up)
4. Pull out the power cord on the Subwoofer (SA-WCT380/WCT381)
from an outlet and insert the power cord again.
