51
<INTERCOM>
A03
INTERCOM CH
1CH(PROD),
2CH(PROD&ENG)
Selects the intercom channel number to be used.
PRODUCER
INTERFACE
CLEAR COM,
4WIRE
, RTS
Sets the producer line intercom system.
SIDETONE
CANCEL
–99 to 99
0
Sets the side tone cancel level. (Setting is possible
when CLEAR COM or RTS is selected)
TERMINATION
OFF
, ON
Sets termination resistance (200 ohms). (Setting is
possible when CLEAR COM or RTS is selected)
OFF:
Displayed when 4WIRE is selected in
SYSTEM I/F. (Display only)
ENGINEER
INTERFACE
CLEAR COM,
4WIRE
, RTS
Sets the engineer line intercom system.
SIDETONE
CANCEL
–99 to 99
0
Sets the side tone cancel level. (Setting is possible
when CLEAR COM or RTS is selected)
TERMINATION
OFF
, ON
Sets termination resistance (200 ohms). (Setting is
possible when CLEAR COM or RTS is selected)
OFF:
Displayed when 4WIRE is selected in
SYSTEM I/F. (Display only)
PGM1 INPUT
–20,
0
, +4 dBu
Sets the PGM1 input level of D-sub connector on
rear panel.
PGM2 INPUT
–20,
0
, +4 dBu
Sets the PGM2 input level of D-sub connector on
rear panel.
<FRONT INTERCOM>
A04
MIC/PGM
(PGM ON), (MIC OFF), (MIC ON)
Front panel MIC/PGM switch position (Display only)
I/F
(PROD), (ENG), (PRIV)
Front panel INTERCOM operation status (Display
only)
PRIVATE SW
ENABLE
, DISABLE(SET TO
ENG), DISABLE(SET TO PROD)
Operation when the INTERCOM switch on the front
panel is set to the PRIV position.
ENABLE:
Private operation
DISABLE(SET TO ENG):
Same function as ENG
position.
DISABLE(SET TO PROD):
Same function as PROD
position.
INTERCOM MIC
DYNAMIC
, ECM, CARBON
Sets the headset microphone connected to the
INTERCOM connector on the front panel.
CARBON:
Carbon microphone (power supply, 20 dB
gain)
ECM:
Electret condenser microphone (power supply,
40 dB gain)
DYNAMIC:
Dynamic microphone (no power supply,
60 dB gain)
INTERCOM MIC
TYPE
BALANCED,
UNBALANCED
Sets the headset microphone connected to the
INTERCOM connector on the front panel.
BALANCED:
Balanced microphone
UNBALANCED:
Unbalanced microphone
INTERCOM MIC
GAIN
–6,
0
, +6 dB
Sets the microphone input gain.
SIDE TONE LEVEL
0 to 99,
50
Sets the side tone level.
PGM MIX MODE
OFF
, INCOM+PGM, L-INCOM/
R-PGM
OFF:
Signals are not mixed.
INCOM+PGM:
INCOM and PGM signals are mixed.
L-INCOM/R-PGM:
Outputs INCOM signal through
the left channel and PGM signal through the right.
PGM SEL
PGM1
, PGM2, PGM1+PGM2
Selects the PGM audio output from the FRONT
INTERCOM connector.
PGM1 LEVEL
0 to 99,
50
Sets the MIX level of PGM1.
PGM2 LEVEL
0 to 99,
50
Sets the MIX level of PGM2.
AUDIO/INTERCOM
Page name
Page No.
Item
Set value
Description
