3-3 (E)
HDCU-F950 IMM
2.
When the turn stops, pull out the remover in the
straight line forcedly.
n
The alignment sleeve can be removed/reinstalled with
the sleeve itself attached to the tip of the remover.
Great care should be taken so as not to lose or damage
the alignment sleeve.
(Alignment sleeve: Sony P/N 9-980-074-01)
3.
Clean the tip of the white optical contacts by a cotton
swab moistened with alcohol.
4.
Insert the remover with the alignment sleeve attached
to its tip, and push it until it clicks.
5.
Rotate the remover counterclockwise to install the
alignment sleeve, and extract the remover.
Alignment sleeve
Optical contacts (white)
3-2. Recommended Replacement Parts
3-2-1. Power Fan
The recommended replacement fan should be used in the
switching regulator of this unit.
The lifespan of the fan is about 30,000 hours, which means
that the fan can be used for about three and a half years if
the power is on all the time, so the fan should be replaced
according to service conditons.
For the replacement procedure, refer to the separately
available maintenance manual.
Replacement Part
Part :
Power fun
Part No. : 9-885-022-85
Summary of Contents for HDCU-F950
