Sony HDC4800 Operating Instructions Manual Download Page 25

Page: 25 / 58

Available menus

USER menu

This menu can include menu pages selected from among the
OPERATION, PAINT, MAINTENANCE, FILE, and
DIAGNOSIS menus, for convenience. Changing, adding, and
deleting pages can be performed with the USER MENU
CUSTOMIZE menu.

USER MENU CUSTOMIZE menu

This menu allows you to edit the USER menu.

For details, see “Editing the USER Menu” (page 27).

ALL menu

This menu permits you to control all items of the OPERATION
menu, PAINT menu, MAINTENANCE menu, FILE menu, and
DIAGNOSIS menu as a single menu.

OPERATION menu

This menu contains items for camera operators to operate the
camera. It mainly permits viewfinder, intercom, and switch
settings.

PAINT menu

This menu contains items for making detailed image
adjustments while using a waveform monitor to monitor the
waveforms output from the camera. Support of a video
engineer is usually required to use this menu.
These item settings are mainly for use with an external remote
control panel or master setup unit.

MAINTENANCE menu

This menu contains items for performing camera maintenance
operations, such as changing the system or setting
infrequently used “paint” items.

FILE menu

This menu is for performing file operations, such as writing or
clearing the reference file.

DIAGNOSIS menu

This menu enables you to confirm the self-diagnostic
information.

To select a menu on the TOP MENU screen

Turn the MENU SEL knob/ENTER button to align the
arrow marker (

) with the desired menu indication.

Press the MENU SEL knob/ENTER button.

The CONTENTS page or the last operated page of the
selected menu is displayed.

Selecting Pages

When selecting a page from a CONTENTS
page

Example: CONTENTS page of the OPERATION menu

Turn the MENU SEL knob/ENTER button to align the arrow
marker (

) to the page to be set and press the MENU SEL

knob/ENTER button.

The selected page is displayed.

To change the displayed page

Check that the arrow marker (

) is located at the left

of the page number, then press the MENU SEL knob/
ENTER button.

The arrow marker (

) will change to a flashing “

” mark.

Turn the MENU SEL knob/ENTER button to flip
through the pages.

When the desired page is displayed, press the MENU
SEL knob/ENTER button.

The “

” mark changes back to the arrow marker (

), and

operations with the displayed page are enabled.

To return to the TOP MENU screen

Align the arrow marker (

) with “TOP” at the top right of the

menu page then press the MENU SEL knob/ENTER button.

CONTENTS 00 TOP

01.<VF DISPLAY>

02.<'!'IND>

03.<VF MARKER>

04.<VF DETAIL>

05.<DYNAMIC FOCUS>

06.<FOCUS POSITION METER1>

07.<FOCUS POSITION METER2>

08.<FOLLOW FOCUS>

09.<FOCUS ASSIST>

10.<ZEBRA>

If the screen can be scrolled, arrows will indicate
the direction of scrolling.

marker

<VF DETAIL> 04 TOP

VF DETAIL : ON 25%

CRISP : 0

FREQUENCY: 9M

FLICKER : OFF

AREA : 100%

ZOOM LINK: ON 50%

COLOR DETAIL : OFF BLUE

PEAK COLOR : OFF

CHROMA LEVEL: 25%

Page number

<VF DETAIL> ? 04 TOP

VF DETAIL : ON 25%

CRISP : 0

FREQUENCY: 9M

FLICKER : OFF

AREA : 100%

ZOOM LINK: ON 50%

COLOR DETAIL : OFF BLUE

PEAK COLOR : OFF

CHROMA LEVEL: 25%

Flashes

Summary of Contents for HDC4800



























































Search results

Summary of Contents for HDC4800

Reviews:

Related manuals for HDC4800

Brands by name

Popular brands

Sony HDC4800, Operating Instructions Manual

Search results

Summary of Contents for HDC4800

Reviews:

Related manuals for HDC4800

Brands by name

Popular brands