Sony HDC4800 Operating Instructions Manual Download Page 11

Page: 11 / 58

When attaching a PL lens, do not rotate the lens. Rotating
the lens may damage the hot shoe pins.

Attaching a B4 lens

In HD format, an HD-size pixel area in the center of the screen
is used. Use the B4 lens attached using the supplied lens
mount adaptor.

Turn the mount cap (PL) of the supplied lens mount
adaptor counterclockwise, and remove the mount
cap. Turn the lens fixing lever (PL) of the camera
counterclockwise, and remove the camera lens
mount cap.

Align the notch on the lens mount adaptor with the
positioning pin on the upper part of the lens mount on
the camera, and insert into the lens mount.

While supporting the lens mount adaptor, turn the
lens fixing lever (PL) clockwise to secure in position.

Turn the lens fixing lever (B4) counterclockwise, and
remove the mount cap (B4) from the lens mount
adaptor.

Align the positioning pin on the B4 lens with the notch
in the upper part of the lens mount adaptor, and insert
the B4 lens into the adaptor.

Note

Hot shoe pins

Lens mount cap of the camera

Mount cap (B4)

Mount cap (PL)

Lens mount
adaptor

Lens fixing lever (PL)

Lens fixing lever (B4)

Mount cap (B4)

Summary of Contents for HDC4800



























































Search results

Summary of Contents for HDC4800

Reviews:

Related manuals for HDC4800

Brands by name

Popular brands

Sony HDC4800, Operating Instructions Manual

Search results

Summary of Contents for HDC4800

Reviews:

Related manuals for HDC4800

Brands by name

Popular brands