2
Chapter 2 Total System
39
HDC-900/950/930 Series Product Information Manual
2-8.
Rack Mounting of System Equipment
19-inch size equipment
The HDCU-900 Camera Control Unit, CNU-700 and
CNU-500 Camera Command Network Units, and VCS-
700 Video Selector can be mounted in a 19-inch
standard EIA rack. These units either mount directly
into the rack or with optional slide rails such as the
Sony RMM-30 Rack Mount Rail. These slide rails allow
the unit to be easily pulled out from the rack and are
recommended if you intended to pull out the unit
frequently.
Warning for Safety Purpose:
It takes two or more people to
mount a unit into a rack. Mounting the unit into a rack by
yourself can cause back or other injuries.
Mounting the unit directly to the rack
Fix the unit to the rack using the rack mount bracket of
the unit. Daily maintenance is easy with the unit
mounted with this method.
Mounting the unit using the RMM-30 Rack Mount
Rail
When the RMM-30 Rack Mount Rail is used, the unit
can be mounted into a rack with a depth of 660 to 830
mm (26 to 32 3/4 inches). Proceed as follows:
1.
Pull out inner member while pushing against the
stopper.
2.
Secure the inner members to both sides of the unit
with the screws (+B4 x 8). Use the screws removed
from or supplied with the unit.
3.
Loosen the screw of the bracket of the outer
member.
4.
Attach the front and rear brackets of the outer
member to the rack. Screws (b), (c) and (d) are
supplied with the RMM-30.
When a 1U unit is mounted
(1) Attach the front bracket to the inside of the front
of the rack at the screw holes at 15.9 mm (22/
32 inch) intervals, using screw (b) and plate nut
(c).
(2) Attach the rear bracket to the outside of the rear
of the rack at the screw holes at 31.75 mm (1 5/
16 inches) intervals, using screws (d).
When a unit other than 1U height is mounted
(1) Attach the front bracket to the outside of the
front of the rack at the screw holes at 31.75 mm
intervals, using screws (d).
12.7
15.9
15.9
12.7
Universal-type rack
12.7
31.75
12.7
Wide-type rack
Inner member
Stopper
Outer member
12.7
12.7
31.75
31.75
12.7
31.75
15.9
15.9
15.9
15.9
12.7
Front
Front
Rear
Rear
Screw
b
Screw
d
Plate nut
c
31.75
Screw
d
Screw
d
Summary of Contents for HDC-900 Series
