Sony HDC-900 Series, Product Information Manual

Page: 120 / 203

7
Chapter 7 Location and Function of Parts and Controls
120
HDC-900/950/930 Series Product Information Manual
C
CLOSE button
Press and light the button to close the iris. To
release the close mode, press the button again
so that it goes dark.
k
AUTO SETUP block
A
Auto adjustment item select buttons
Press and light up these buttons to select the
items to be automatically adjusted.
SKIN DTL AUTO HUE : Skin tone detail
automatic hue.
LEVEL : Gamma balance, knee point, master
black level, etc.
B
START/BREAK button
Press to start automatic adjustment of the
selected items. The button lights during
adjustment and goes dark when adjustment is
completed. If you press the button when lit, the
automatic adjustment is canceled and the
button flashes. To stop the flashing, press the
button again.
C
WHITE (white balance) button
Press to automatically adjust the white balance.
The button lights during adjustment and goes
dark when adjustment is completed. If you press
this button when lit or the START/BREAK button,
the automatic adjustment is canceled and the
button flashes. To stop the flashing, press the
button again.
D
BLACK (black balance) button
Press to automatically adjust the black balance
and black set. The button lights during
adjustment and goes dark when adjustment is
completed. If you press this button when lit or
the START/BREAK button, the automatic
adjustment is canceled and the button flashes.
To stop the flashing, press the button again.
Note
If an error occurs during adjustment, the
pressed button flashes.
l
Menu operation block
A
MODE (mode select) buttons
Select the menu mode. If you press and light
one of these buttons, the menu for the selected
mode appears on the LCD.
PAINT 1/2/3 : Each selects the Paint menu to
adjust various paint items, such as white,
black, and flare.
SCENE : Selects the File operation menu to
register and retrieve scene files.
MAINTENANCE : Selects the Maintenance
menu to set the H and SC phases of CCU/
HDCU and operational conditions of this
control panel.
FUNCTION : Selects the Function menu to
control various camera and CCU/HDCU
functions. When none of the buttons are lit, the
status display is obtained.
B
LCD/touch panel
Normally displays the statuses. When you press
a MODE button, the corresponding menu is
displayed to permit you to adjust the displayed
items.
C
Control knobs (rotary encoders)
Adjust the selected items on the touch panel.
m
DETAIL knob
Used to adjust the detail level. You may select HD
detail or SD detail using the Maintenance menu.
n
MEMORY STICK media card slot and access
lamp
Insert a Memory Stick media card to store setting
data, such as reference files and scene files of the
video camera or CCU/HDCU.
The access lamp shows the status of the
Memory
Stick media card.
Off : No Memory Stick media card is inserted.
Lit in green : There is a Memory Stick media card in
the slot. In this condition, you can safely eject the
Memory Stick media card.
Lit in red : Data are being read/written. If you eject the
Memory Stick media card in this condition, the data
are not guaranteed. All the data may be lost.
LEVEL
AUTO SETUP
SKIN DTL
AUTO HUE
START/
BREAK
WHITE BLACK
1 2 4 3
PAINT 1 PAINT 2 PAINT 3 SCENE MAINTE
NANCE
FUNCTION
1
2
3