![background image](http://html.mh-extra.com/html/sony/hcd-shake7/hcd-shake7_service-manual_420881013.webp)
HCD-SHAKE7
13
SECTION 3
STORM TEST MODE
[PANEL TEST MODE]
This mode is used to check the
fl
uorescent indicator tube, LEDs,
keys, [VOLUME / DJ CONTROL] jog, model, destination and
software version.
Procedure:
1. Press [ENTER] and [MUSIC] button simultaneously and hold
3 seconds.
2. All LEDs and segments in
fl
uorescent indicator tube are light-
ed up. All RGB LEDs are lighted up in white color.
3. When you want to enter to the software version display mode,
press [
+ /
] button.
The model information appears on the
fl
uorescent indicator
tube.
•
“STORM” is shown for SHAKE-7.
** If display shown information below, please proceed with
[MODEL & DEST WRITE MODE] to write model & destina-
tion.
•
“STORM(T)” is shown for SHAKE-7.
Press
[
+ /
] button again to view the destination informa-
tion.
4. During the destination information display, press [
+ /
]
button. Each time [
+ /
] button is pressed, the
fl
uorescent
indicator tube shows the version of each category software in
the following sequence: SC, MTK, UI, PF, SYS, CD, CDMA,
CDMB, ST, TA, TAS, TM, BTM, BT, NFC, and return back to
model information display.
5. When [
] button is pressed while the version numbers
are being displayed except model and destination, the
date of the software creation appears. When [
] button
is pressed again, the display returns to the software ver-
sion display.
6. Press
[
- /
] button, the key check mode is activated.
7. In the key check mode, the
fl
uorescent indicator tube displays
“K 0 V0”.
• Each time a button is pressed, “K” value increases.
However, once a button has been pressed, it is no lon-
ger taken into account.
• “V” value increases in the manner of 0, 1, 2, 3... if
[VOLUME / DJ CONTROL] knob is turned clock-
wise, or it decreases in the manner of 0, 9, 8, 7... if
[VOLUME / DJ CONTROL] knob is turned counter-
clockwise.
8. When [ENTER] button is pressed after all LEDs and segments
in
fl
uorescent indicator tube light up, alternate segments in
fl
uorescent indicator tube and LEDs would light up, all RGB
LEDs would light up in red color. If you press [ENTER] but-
ton again, another half of alternate segments in
fl
uorescent in-
dicator tube and LEDs would light up, all RGB LEDs would
light up in green color. Pressing [ENTER] button again would
cause all segments in
fl
uorescent indicator tube and LEDs light
up, all RGB LEDs would light up in blue color. Pressing [EN-
TER] button again would turn off all segments in
fl
uorescent
indicator tube and all LEDs including RGB LEDs.
9. To release from this mode, press the buttons in the same man-
ner as step 1, or disconnect the power cord.
[MODEL & DEST WRITE MODE]
This mode is used to set software model & destination.
This mode is only available when no permanent model & destina-
tion is stored.
Procedure:
1. Press [ENTER] and [FOOTBALL] button simultaneously and
hold for 5 seconds.
2. Fluorescent indicator tube display will show “M XXXXX”.
3. Press [
+ /
] button to select the model based on the set’s
model.
Product Code
F. Tube display
STORM
“M STORM”
4. Press [ENTER] button.
5. Fluorescent indicator tube display will show “D XXXXX”.
6. Press [
+ /
] button to select the destination based on the
set’s country.
Area Code
Country
F. Tube display
J1
Japan
“D J”
JE1
Tourist
“D JE”
U2/CA2
America, Canada
“D NA”
CEL/CE1/
CE2
Europe (general)
“D CE2”
CEK
U.K.
“D CEK”
RU1/RU3
Russia
“D RU”
AU1
Australia
“D AU”
CN1
China
“D CN”
E12
India, Pakistan, Morocco
“D E12”
E3/E93/
SA2/E15
Middle East, Africa
(South Africa), Iran
“D E3”
E4
Africa
“D E12”
EA3
Saudi Arabia
“D EA3”
HK1/
HK2/PL1/
SP1/SP2/
SP6/TH1
Hong Kong, Philippines,
Singapore, Malaysia,
Thailand
“D ASIA”
KR2
Korea
“D KR”
TW2
Taiwan
“D TW”
E2, E32,
E51, AR2
Latin America (general),
Chile, Peru, Argentina
“D LATIN”
BR1
Brazil
“D BR”
MX2,
MX4
Mexico
“D MX”
7. Press [ENTER] button to con
fi
rm the selection.
8. “RESET” appears on the
fl
uorescent indicator tube. After that,
the
fl
uorescent indicator tube becomes blank for a while, and
the system is reset.
9. Perform [PANEL TEST MODE] again to con
fi
rm on the mod-
el & destination.
Summary of Contents for HCD-SHAKE7
Page 91: ...MEMO HCD SHAKE7 91 ...