![background image](http://html.mh-extra.com/html/sony/hcd-shake7/hcd-shake7_service-manual_420881005.webp)
HCD-SHAKE7
5
NOTE OF REPLACING MOTHERBOARD BOARD OR
BLUETOOTH MODULE OR RC-S801/A (WW) BOARD
When the MOTHERBOARD board or BLUETOOTH module or
RC-S801/A (WW) board are replaced, please execute the below
service mode.
Pairing this system with a
Bluetooth device
1. Press the [
\
/
1
] button to turn the power on.
2. Place
the
Bluetooth
device within 1 meter from the system.
3. Press BLUETOOTH on the unit to select
Bluetooth
function.
“BLUETOOTH” appears in the display panel.
4. Hold down BLUETOOTH on the unit for 2 seconds or more.
“PAIRING”
fl ashes in the display panel.
5. Perform the pairing procedure on the
Bluetooth
device.
6. Select the model number of the unit on the display of the
Bluetooth
device.
For example, select “SONY SHAKE-7”.
If passkey is required on the
Bluetooth
device, enter “0000”.
7. Perform
the
Bluetooth
connection on the
Bluetooth
device.
8. When pairing is completed and the
Bluetooth
connection is
established,
Bluetooth
device name appears in the display
panel.
9. To cancel pairing operation, hold down BLUETOOTH on the
unit for 2 seconds or more until “BLUETOOTH” appears in
the display panel.
Connecting with a smartphone by one touch (NFC)
Note:
The operation in this mode must use a NFC-compatible smartphone
(Smartphones with a built-in NFC function [OS: Android 2.3.3 or
later, excluding Android 3.x])
1. Press the [
\
/
1
] button to turn the power on.
2. Download and install the app “NFC Easy Connect”.
Download the free Android app from Google Play by searching
for “NFC Easy Connect”.
3. Start the app “NFC Easy Connect” on the smartphone.
Make sure that the application screen is displayed.
4. Touch the smartphone to the N-Mark on the system until the
smartphone vibrates.
Complete the connection by following the instructions
displayed on the smartphone.
5. When pairing is completed and the
Bluetooth
connection is
established, the
Bluetooth
device name appears in the display
panel.
Playing music from a
Bluetooth device
For a
Bluetooth
device
1. Press the [
\
/
1
] button to turn the power on.
2. Press BLUETOOTH on the unit to select
Bluetooth
function.
“BLUETOOTH” appears in the display panel.
3. Establish connection with the
Bluetooth
device.
The last connected
Bluetooth
device will be connected
automatically.
Perform
the
Bluetooth
connection from the
Bluetooth
device if
the device is not connected.
Once the connection is established, the
Bluetooth
device name
appears in the display panel.
4. Press
N
.
Depending on the
Bluetooth
device,
– you may have to press
N
twice.
– you may need to start playback of an audio source on the
Bluetooth
device.
For an NFC-compatible smartphone
1. Press the [
\
/
1
] button to turn the power on.
Touch the smartphone to the N-Mark on the system to establish
the
Bluetooth
connection.
Start playback of an audio source on the smartphone. For
details on playback, refer to the operating instructions of your
smartphone.
To disconnect the
Bluetooth
device
For a
Bluetooth
device
Press BLUETOOTH on the unit.
“BLUETOOTH” appears in the display panel.
For an NFC-compatible smartphone
Touch the smartphone to the N-Mark on the system again.
To erase all the pairing registration information perform
COLD RESET test mode (Refer page 14).
Summary of Contents for HCD-SHAKE7
Page 91: ...MEMO HCD SHAKE7 91 ...