![background image](http://html.mh-extra.com/html/sony/hcd-cp505/hcd-cp505_service-manual_420601043.webp)
43
HCD-CP505
4.
Mode: Playback
AF OSC
ANALOG IN (SJ302)
1) 60 Hz
2) 5 kHz
3) 10 kHz
blank tape
CS-123
set
attenuator
600
Ω
109 mV (–17 dB)
recorded
position
level meter
set
6
Ω
SJ301
SPEAKER
E-F Balance (1 Track jump) Check
Procedure:
1.
Connect oscilloscope to TP (TE) and TP (DVC).
2.
Turned Power switch on.
3.
Load a disc (YEDS-18) and playback the number five track.
4.
Press the CD
u
button. (Becomes the 1track jump mode.)
5.
Confirm that the level B and A (DC voltage) on the oscilloscope
waveform.
Specification level:
x
100=less than
±
22%
[BD (CD) BOARD] — SIDE B —
0V
Center of
waveform
B
Symmetry
A (DC voltage)
level=1.1
±
0.6Vp-p
A
B
CD SECTION
Note :
1. CD Block is basically designed to operate without adjustment.
Therefore, check each item in order given.
2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated.
3. Use an oscilloscope with more than 10M
Ω
impedance.
4. Clean the object lens by an applicator with neutral detergent
when the signal level is low than specified value with the
following checks.
RF Level Check
Procedure :
1. Connect oscilloscope to TP (RFAC) and TP (DVC).
2. Turned Power switch on.
3. Load a disc (YEDS-18) and playback the number five track.
4. Confirm that oscilloscope waveform is clear and check RF signal
level is correct or not.
Note:
Clear RF signal waveform means that the shape “
◊
” can be
clearly distinguished at the center of the waveform.
TP(RFAC)
TP(DVC)
BD (CD) BOARD
oscilloscope
VOLT/DIV : 200mV
TIME/DIV : 500ns
level : 1.1
±
0.3Vp-p
BD (CD) BOARD
Oscilloscope
TP (TE)
TP (DVC 1.65V)
IC101
IC103
IC104
TP (DVC)
TP (TE)
TP (RFAC)
3.
Mode: Record
5.
The playback output level should be –4.5
±
3 dB (60 Hz),
1
±
3 dB (5 kHz) and –3
±
3 dB (10 kHz).
Summary of Contents for HCD-CP505
Page 63: ...63 63 HCD CP505 6 18 Schematic Diagram Control Section 2 2 Page 49 Page 57 ...
Page 65: ...65 65 HCD CP505 6 20 Schematic Diagram Switch Section Page 62 Page 55 ...
Page 69: ...69 HCD CP505 6 24 Schematic Diagram OPTICAL Board J CN602 DIGITAL 470 Page 62 ...
Page 105: ...105 HCD CP505 MEMO ...