27
HCD-CP505
8. To exit from this mode, press
?
/
1
button or disconnect the power cord.
4. CD Ship Mode (Setting the Position for Transportation)
1.
Press
?
/
1
button to turn the power on.
2.
Press FUNCTION to change the function to “CD”.
3.
Press two buttons
x
, ENTER/START and turn of the knob simultaneously.
4.
The CD mechanism goes to the transportation mode.
5.
When “LOCK” is displayed, disconnect the power cord.
6.
The lock is released when the power turns on next.
5. Ship Mode (Setting the Position for Transportation)
This mode is the combination of CD SHIP mode and Cold reset.
In this mode, the MD reset is not activated.
1.
Press
?
/
1
button to turn the power on.
2.
Press three buttons
Z
, ENTER/START and turn of the TUNING – knob simultaneously.
3.
When “LOCK” is displayed, disconnect the power cord.
4.
The lock is released when the power turns on next.
6. Disc Tray Lock
Procedure:
1.
Press the
?/1
button to turn the set on.
2.
Select the function “CD”.
3.
A disc is put in and a tray is closed.
4.
Press two buttons of ENTER/START and
Z
(CD) simultaneously for five seconds.
5.
The message “LOCKED” is displayed and the tray is locked. (Even if exiting from this mode, the tray is still locked.)
6.
Press two buttons of ENTER/START and
Z
(CD) simultaneously for five seconds again.
7.
The message “UNLOCKED” is displayed and the tray is unlocked.
8.
To exit from this mode, press the
?/1
button to turn the set off.
Summary of Contents for HCD-CP505
Page 63: ...63 63 HCD CP505 6 18 Schematic Diagram Control Section 2 2 Page 49 Page 57 ...
Page 65: ...65 65 HCD CP505 6 20 Schematic Diagram Switch Section Page 62 Page 55 ...
Page 69: ...69 HCD CP505 6 24 Schematic Diagram OPTICAL Board J CN602 DIGITAL 470 Page 62 ...
Page 105: ...105 HCD CP505 MEMO ...