![background image](http://html.mh-extra.com/html/sony/hcd-cp2/hcd-cp2_service-manual_420596044.webp)
44
7-21.
IC PIN FUNCTION DESCRIPTION
•
MAIN BOARD IC802 CXP84332-168Q (SYSTEM CONTROLLER)
Pin No.
Pin Name
I/O
Description
1
A/B
O
Deck-A/B selection signal output to the HA12203NT (IC401) “L”: deck-A, “H”: deck-B
2
AMP-STBY
O
Standby on/off control signal output to the power amplifier (IC101, 201) “L”: standby mode
3
HI DUB REC
O
High speed dubbing control signal output to the HA12203NT (IC401)
4
C-XRST
O
Reset signal output to the CXA1992BR (IC701) and CXD2589Q (IC703) “L”: reset
5
SPEAK RELAY
O
Speaker protect relay drive signal output terminal “H”: relay on
6
AMP-MUTE
O
Muting on/off control signal output to the power amplifier (IC101, 201) “H”: muting on
7
REC-BIAS
O
Recording bias on/off selection signal output to the HA12203NT (IC401)
“L”: bias on, “H”: bias off
8
REC/PB
O
Recording/playback/pass selection signal output to the HA12203NT (IC401)
“L”: recording mode, “H”: pass, “Hi-z”: playback mode
9
CAP MOTOR
CON
O
Capstan motor on/off control signal output terminal “H”: motor on
10
CAP MOTOR
H/L
O
High/normal speed selection signal output of the capstan motor
“L”: normal speed, “H”: high speed
11
TRIG MOTOR
CON (A)
O
Deck-A side trigger motor drive signal output to the trigger motor drive (IC402)
“H”: motor on
12
TRIG MOTOR
CON (B)
O
Deck-B side trigger motor drive signal output to the trigger motor drive (IC402)
“H”: motor on
13
TRIG MOTOR
H/L
O
Trigger motor control signal output terminal
14
T-HALF (A)
I
Detection input from the deck-A cassette detect switch (S1003)
“L”: cassette in, “H”: no cassette
15
T-PLAY (A)
I
Detection input from the deck-A play detect switch (S1001) “H”: deck-A play
16
TC-SHUT (A)
I
Shut off detection signal input from the deck-A side reel pulse detector (Q1001)
17
TC-SHUT (B)
I
Shut off detection signal input from the deck-B side reel pulse detector (Q1002)
18
T-PLAY (B)
I
Detection input from the deck-B play detect switch (S1002) “H”: deck-B play
19
TU-TUNED
I
Tuning detection signal input from the tuner pack “L”: tuned
20
TU-DATA
O
PLL serial data output to the tuner pack
21
TU-CLK
O
PLL serial data transfer clock signal output to the tuner pack
22
TU-COUNT
I
PLL serial data input from the tuner pack
23
TU-CE
O
PLL chip enable signal output to the tuner pack
24
RDS-DATA
I
RDS serial data input from the RDS decoder (IC803)
(Used for the AEP, UK and North European models only)
25
RDS-ON
O
Power supply on/off control signal output of the tuner pack (+7.5V) and RDS decoder (IC803)
(Used for the AEP, UK and North European models only)
26
C/D
O
Command data output to the liquid crystal display driver (IC800)
27
LCD DATA
O
Serial data output to the liquid crystal display driver (IC800)
28
LCD CLK
O
Serial data transfer clock signal output to the liquid crystal display driver (IC800)
29
LCD CE
O
Chip enable signal output to the liquid crystal display driver (IC800)
30
RESET
I
System reset signal input from the reset signal generator (IC801) “L”: reset
For several hundreds msec. after the power supply rises, “L” is input, then it changes to “H”
31
EXTAL1
I
Main system clock input terminal (4.19 MHz)
32
XTAL1
O
Main system clock output terminal (4.19 MHz)
33
VSS
—
Ground terminal
34
TX
O
Sub system clock output terminal (32.768 kHz)
35
TEX
I
Sub system clock input terminal (32.768 kHz)
36
AVSS
—
Ground terminal (for A/D converter)
Summary of Contents for HCD-CP2
Page 5: ...5 This section is extracted from instruction manual ...
Page 18: ...18 ...