![background image](http://html.mh-extra.com/html/sony/hcd-cp2/hcd-cp2_service-manual_420596011.webp)
11
[MC Cold Reset]
• The cold reset clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning
the set to the customer.
Procedure:
1. While pressing the
?
/
1
button, connect the power cord.
2. The set is reset.
[CD Aging Mode]
This mode can be used for operation check of CD section.
Procedure:
1. Load a CD disc.
2. Set to standby state.
3. Press three buttons of
x
(TAPE B),
x
(CD), and
[TUNER]
simultaneously.
4. The aging is executed in bellow sequence.
5. To release from the aging mode, press the
?
/
1
button to turn
the power OFF.
Aging mode sequence:
[Tape Deck Aging Mode]
This mode can be used for operation check of tape deck section.
Procedure:
1. Set a tape in the tape deck-B.
2. Set to standby state.
3. Press three buttons of
x
(TAPE B),
x
(CD), and
[TAPE]
simultaneously.
4. The aging is executed in bellow sequence.
5. To release from the aging mode, press the
?
/
1
button to turn
the power OFF.
SECTION 4
TEST MODE
Start
Open the disc tray
Close the disc tray
Play the last track
Aging mode sequence:
[Liquid Crystal Display All Lit Check Mode]
Procedure:
1. Set to standby state.
2. Press three buttons of
x
(TAPE B),
x
(CD), and
[VIDEO]
simultaneously.
3. Liquid crystal display are all turned on.
4. To release from this mode, press the
?
/
1
button to turn the
power OFF.
[ROM Version Display Mode]
Procedure:
1. Set to standby state.
2. Press three buttons of
x
(TAPE B),
x
(CD), and
[DSG]
si-
multaneously.
3. The ROM version is displayed.
Start
REC pause for 3 seconds
FWD REC
Fast forward
REV Play
REC pause for 3 seconds
REV REC
Rewind
FWD Play
Shut off
Shut off
Shut off
Shut off
1 minute
3 minutes
1 minute
3 minutes
Summary of Contents for HCD-CP2
Page 5: ...5 This section is extracted from instruction manual ...
Page 18: ...18 ...