6-23
HVR-S270J/S270U/S270N/S270E/S270P/S270C
21. C5 Page table
Note 1:
If reading/writing data on pages C5, set data: 0C to page:
0, address: 10, and then select pages: 5. By this data set-
ting, the pages C5 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
22. C6 Page table
Note 1:
If reading/writing data on pages C6, set data: 0C to page:
0, address: 10, and then select pages: 6. By this data set-
ting, the pages C6 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to DF
Fixed data-1 (Initialized data)
23. C7 Page table
Note 1:
If reading/writing data on pages C7, set data: 0C to page:
0, address: 10, and then select pages: 7. By this data set-
ting, the pages C7 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
24. C8 Page table
Note 1:
If reading/writing data on pages C8, set data: 0C to page:
0, address: 10, and then select pages: 8. By this data set-
ting, the pages C8 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
25. C9 Page table
Note 1:
If reading/writing data on pages C9, set data: 0C to page:
0, address: 10, and then select pages: 9. By this data set-
ting, the pages C9 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
26. CA Page table
Note 1:
If reading/writing data on pages CA, set data: 0C to page:
0, address: 10, and then select pages: A. By this data set-
ting, the pages CA can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
