Sony Handycam DCR-PC108E Operation Manual Download

Page: 4 / 148

Read this first

Notes on handling the Handycam Station

• When attaching your camcorder to the Handycam

Station, insert your camcorder in the direction of the
arrow as shown in the following illustration. Be sure
to insert it all the way.

• When removing your camcorder from the

Handycam Station, hold both your camcorder and
the Handycam Station as shown in the following
illustration, and remove it from the Handycam
Station.

Notes

• When disconnecting the AC Adaptor from the

Handycam Station, hold both the DC plug and the
Handycam Station and disconnect the AC Adaptor.

• Be sure to turn the power of your camcorder off

before inserting it into or removing it from the
Handycam Station.

• Your camcorder may not attach properly to the

Handycam Station if the camcorder’s DC IN jack
cover is open or the Strap Belt is caught between
your camcorder and the Handycam Station.

• Do not connect the A/V connecting cables or the AC

Adaptors to both your camcorder and the Handycam
Station simultaneously while using your camcorder.
This may cause a malfunction.

Summary of Contents for Handycam DCR-PC108E





















































































































































Search results

Summary of Contents for Handycam DCR-PC108E

Reviews:

Related manuals for Handycam DCR-PC108E

Brands by name

Popular brands

Sony Handycam DCR-PC108E, Operation Manual

Search results

Summary of Contents for Handycam DCR-PC108E

Reviews:

Related manuals for Handycam DCR-PC108E

Brands by name

Popular brands