Sony Handycam DCR-PC108E Operation Manual Download

Page: 16 / 148

Getting started

Step 2: Charging the
battery pack

You can charge the battery by attaching the
“InfoLITHIUM” battery pack (F series) to
your camcorder.

Notes

• You cannot use batteries other than the

“InfoLITHIUM” battery pack (F series) (p. 129).

• Do not short-circuit the DC plug of the AC Adaptor

or battery terminals with any metallic objects. This
may cause a malfunction.

• Use a nearby wall socket when using the AC

Adaptor. Disconnect the AC Adaptor from the wall
socket immediately if any malfunction occurs.

Slide the BATT

(battery release)

lever and remove the battery terminal
cover.

Attach the battery pack with its
terminal side facing your camcorder as
shown in the following illustration and
press down the battery pack until it
clicks.

With the

mark on the DC plug facing

up, connect the AC Adaptor to the DC
IN jack on the Handycam Station.

Connect the mains lead to the AC
Adaptor.

Connect the mains lead to the wall
socket.

To the wall socket

DC plug

Mains lead

AC Adaptor

DC IN jack

Handycam Station

BATT

(battery release) lever

mark

DC IN jack

Summary of Contents for Handycam DCR-PC108E





















































































































































Search results

Summary of Contents for Handycam DCR-PC108E

Reviews:

Related manuals for Handycam DCR-PC108E

Brands by name

Popular brands

Sony Handycam DCR-PC108E, Operation Manual

Search results

Summary of Contents for Handycam DCR-PC108E

Reviews:

Related manuals for Handycam DCR-PC108E

Brands by name

Popular brands