3-60
GY-8240UWD
GY-8240FC
3-16. Reel Shift Gear Replacement
Outline
Replacement
1.
Removing the Reel Motor Plate Assembly (Refer to steps 1 to 4 in Section 3-14.)
2.
Removing the PA Guard (Refer to step 2 in Section 3-15.)
3.
Removing the Motor Holder Assembly (Refer to step 3 in Section 3-15.)
4.
Removing the Drive Gear Assembly
5.
Removing the Worm Assembly
6.
Installing the Worm Assembly
7.
Installing the Drive Gear
8.
Installing the Motor Holder Assembly (Refer to step 4 in Section 3-15.)
9.
Installing the PA Guard (Refer to step 5 in Section 3-15.)
10. Installing the Reel Motor Plate Assembly (Refer to steps 5 to 10 in Section 3-14.)
Adjustment after Replacement
11. Confirming the Reel Shift Motor Operation
(CH02: Reel Shift Motor Check) (Refer to Section 5-4-13.)
Note
.
When replacing the reel shift gear, replace the whole drive gear (S) / (T) assembly
and the whole worm assembly.
.
When replacing the drive gear (S) / (T) assembly or worm assembly, prepare a
new stop washer.
Stop washer: 3-650-537-01
Preparation
1.
Turn the power off and remove the power cord.
2.
Remove the top panel. (Refer to Section 1-1.)
3.
Remove the plate MD. (Refer to Section 1-2.)
4.
Remove the cassette compartment. (Refer to Section 1-2.)
Removal
1. Removing the Reel Motor Plate
Assembly
Remove the reel motor plate assembly.
(Refer to steps 1 to 4 in Section 3-14.)
2. Removing the PA Guard
Remove the PA guard.
(Refer to step 2 in Section 3-15.)
3. Removing the Motor Holder Assembly
Remove the motor holder assembly.
(Refer to step 3 in Section 3-15.)
3-16. Reel Shift Gear Replacement