3-63
GY-8240UWD
GY-8240FC
3-18. Tape Cleaner Replacement
n
Do not touch the tape cleaner with bare hands.
The tape cleaner has a sharp edge, which may cause a hand cut.
Outline
Replacement
1.
Removing the Tape Cleaner
2.
Installing the Tape Cleaner
Note
Adjustment after the tape cleaner replacement is not required.
Tools
.
Torque screwdriver (6 kg
.
cm)(JB-5251):
J-6252-510-A
.
Torque screwdriver’s bit (
+
2 mm, l = 75 mm): J-6323-420-A
Preparation
1.
Turn the power off and remove the power cord.
2.
Remove the top panel. (Refer to Section 1-1.)
3.
Remove the plate MD. (Refer to Section 1-2.)
4.
Remove the cassette compartment. (Refer to Section 1-2.)
Removal
1. Removing the Tape Cleaner
Remove the screw, then remove the tape cleaner
from the S plate assembly.
Installation
2. Installing the Tape Cleaner
Tighten the screw while moving a new tape
cleaner clockwise.
Tightening torque: 19.6
x
10
_
2
N
.
m {2 kgf
.
cm}
Remove/Install the Tape Cleaner
3-18. Tape Cleaner Replacement
Tape cleaner
S plate assembly
PS2
x
6