Sony FWD-S42E1, Operating Instructions Manual

Page: 66 / 256

24
GB
FWD-S42E1
4-160-338- 01 (1)
Screen Settings
For how to select and change settings, see the section of “Overview of the Menus” (page 21).
If no signal is now being input, you can only select “Multi Display” in the “Screen” settings.
Menu Function and operation
Multi Display
Allows you to make settings for connecting multiple displays to form a video wall.
• During video input, “Multi Display” displays a picture as close as possible to the
current “Aspect” setting. But during PC input, it displays with “Aspect” set to “Full
2”.
• When “Position” is set to the right-bottom, the 1 indicator lights up even if “LED” is
set to “Off”. The indicator also lights up even when the display is off (standby), errors
are detected, or the display is in sleep mode including the case of no signal or
unsupported signal.
Multi Display Do settings to form a video wall.
Off Uses a single screen.
“2×2”/“3×3”/“4×4” Settings to connect 2, 3 or 4 displays both vertically and horizontally.
“1×2”/“1×3”/“1×4” Settings to connect 2, 3 or 4 displays horizontally.
“2×1”/“3×1”/“4×1” Settings to connect 2, 3 or 4 displays vertically.
Position Settings for the screen position of each display.
Output Format You can select a picture output format. The picture position is automatically adjusted,
and you can get a suitable picture output.
Tiles Shows full signal on each screen.
Window Shows one large picture with multi display naturally. Part of the signal will go behind the
bezel area.
LED Selects “On” or “Off”. If you select “On”, the 1 indicator on the front panel (page 9) to
be continually turned on.
Notes
Notes
010COV.book Page 24 Monday, October 12, 2009 4:42 PM