Sony FWD-S42E1, Operating Instructions Manual

Page: 58 / 256

16
GB
FWD-S42E1
4-160-338- 01 (1)
Using the ID MODE button
You can operate a specific display without affecting
other displays installed at the same time.
1
Press ON button.
Display’s “Index Number” appears in black
characters on the lower left menu on the screen.
(Every display is allocated an individual preset
“Index Number” from 1 to 255.)
2
Input the “Index Number” of the display you
want to operate using the 0
-
9 buttons on
the remote control.
The input number appears right next to the “Index
Number” of each display.
3
Press SET button.
The characters on the selected display change to
green while the others change to red.
You can operate the specified display indicated
with green characters only.
Only the operation of ON button and
1
STANDBY/ID MODE-OFF button is effective to
other displays, as well.
4
When all of the setting changes have been
completed, press
OFF button.
The display returns to the normal screen.
To correct the Index Number
Press the C button to clear the current input “Index
Number”. Return to Step 2 , and input a new “Index
Number”.
Tip
To change the “Index Number” of the display, see “Index
Number” in “Control Setting” on page 26.
Index Number : 117
Index Number
Index Number : 117 117
Input Number
010COV.book Page 16 Monday, October 12, 2009 4:42 PM