Sony FWD-50PX1 (English: pgs. 52-97), Service Manual

Page: 18 / 112

1-12
FWD-50PX1
1-5. Service Position
1-5-1. Service Position of the B and Q Boards
m
.
Be sure to attach the stand with more than two persons.
.
When attach the stand to the unit, check that four knobs are attached to the holes of the stand.
1. Remove the rear cover assembly. (Refer to Section 1-2-1.)
2. Remove the two cushions (15
x
25) attached to the two screws.
3. Remove the bolt (M8
x
16) and two screws, then remove the QB shield assembly.
4. Attach the four knobs to the unit by the four screws.
5. Attach the four knobs to the holes of the each stand.
Unit
Unit
Stands
Stands
Bolt
(M8
x
16)
PSW
M6
x
20
PSW
M6
x
20
PSW
3
x
6
Q board
Knobs
Knobs
Q/B shield
cover
B board
Unit
Cushion
(15
x
25)
Atacch the two knobs
to the each stand.