5
Film Mount Table
5
Film-direction select switches
Set the switches according to the film direction.
6
PT rollers
Remove dust from the film when it runs between them.
These rollers must be cleaned periodically.
For details on cleaning, see Maintenance Manual Part 1.
7
LAMP power switch
Press to turn the lamp on.
1
Interlock switches
Detect whether the front doors are open or closed. If
you open a door, power supply to the film transport
block is disabled.
2
Supply reel
Mount the film.
3
Take-up reel
Attach a reel for winding the film.
4
Film stoppers
Turn these rods over the film to avoid loosening of the
roll.
2
Supply reel
1
Interlock switches
3
Take-up reel
6
PT rollers
4
Film stoppers
5
Film-direction
select switch
6
PT rollers
4
Film stoppers
5
Film-direction
select switch
7
LAMP power switch