4-52
BFC-1
4-12-3. Remodeling the Hand Assembly (for DVCAM)
It is necessary to remodel the hand portion so that the cassette for
DV can be retained.
Prepare BKFC-210 for the remodeling below.
1.
Hand assembly removal
(1) Remove one screw, then remove the hand cover.
(2) Pull out the harnesses from connectors CN1 and CN2 on
the hand board.
Note: Pull out the harness from connector CN8
when a barcode reader (optional) is in-
stalled.
(3) Remove one screw, then remove the hand assembly
from the elevator.
2.
Finger replacement
(1) Remove the three screws, then remove the finger (up-
per).
(2) Install the finger (DV) of BKFC-210 in the hand assem-
bly with three screws.
HAND ASSEMBLY
SCREW
(PWH 4
x
8)
SCREW
(PWH 4
x
8)
CN1
CN2
CN8
HAND COVER
SCREWS
(PWH 3
x
6)
SCREWS
(PWH 3
x
6)
FINGER (UPPER)
FINGER (DV)
