4-1
BFC-1
4-1.
PRECAUTION
At least two or more persons are required for the cart machine in-
stallation to be safe.
4-2.
PREPARATION
4-2-1.
Combination to Install Equipments
Table. 4-2-1 shows combination list to install equipments.
Confirm that required equipments are prepared before installa-
tion.
4-2-2.
Fixture
Fixtures to install the cart machine are introduced below.
.
Wrench (to opposite side: 30 mm)
It is used when adjustment of caster on the console and floor
leveler.
.
Hexagonal Wrench (to opposite side: 3 mm)
It is used when front door removal.
.
Screw Driver (No. 2: for M3 through M5)
It is used when install the rack mount and the BIN unit.
Short screw driver is efficient because maintenance space is
limited.
.
Adjustment Stick
It is used when rotary switch on the following board of BIN unit
is set.
SE-198 board: for BETACAM, HDCAM, MPEG IMX and
S-VHS
SE-200 board: for D2
SE-481 board: for DVCAM
.
Flat-blade screwdriver
Tightening the guide pins.
.
Tweezers (for BKFC-210)
To hook the tension spring to the hand block.
*
2
*
3
*
1
*
1:
*
2:
Table 4-2-1.
VTR
Rack Mount Kit
BIN Unit
Hand KIt
Prepare BKFC-53 having a product code ending with -1
or higher when installing the BETACAM UVW series VTRs.
Prepare BKFC-53 having a product code ending with -2
or higher when installing the Digital BETACAM DVW series
VTRs, BETACAM SX VTRs and HDCAM VTRs.
Prepare BKFC-53 having a product code ending with -3
or higher when installing the MPEG IMX VTRs.
Prepare BKFC-52 having a product code ending with -1
or higher when installing the DVR-18/28 series VTRs.
Prepare BKFC-54 having a product code ending with -1
or higher when installing the DSR-1600/1800 series VTRs.
.
.
.
BETACAM
HDCAM
MPEG IMX
D-2
S-VHS
BKFC-53
BKFC-52
BKFC-53
BKFC-54
BKFC-10B
BKFC-8D
DVCAM
BKFC-21DV
—
—
BKFC-210
*
3:
—
SECTION 4
INSTALLATION AND ASSEMBLING PROCEDURE
