4-23
BFC-1
(7) Confirm that BIN (top) assembly is the same as lower BIN
units.
*
BIN plate is changed by remove the LCR panel and over-
turn the BIN (top) assembly.
In case of the above, install the BIN (top) assembly to the
cart machine and attach the LCR panel.
(8) Rivet the number sheet (supplied with the BFC-1) to each
side of the BIN unit with two nylon rivets.
(9) BIN lamp and BIN sensor is checked at preoperation check.
(10) BIN unit removal is performed in the reverse order of procedure.
R
C
L
Overturn BIN (TOP)
assembly.
BIN (TOP)
ASSEMBLY
The same BIN
LCR PANEL
13
14
15
16
13
14
15
16
NYLON
RIVETS
NYLON RIVETS
NUMBER SHEETS
