Sony EditStation ES-7 Operating Instructions Manual Download Page 90

Page: 90 / 116

Chapter 3 Connections and Settings

Reinstalling the Software

If the EditStation software fails to operate because of
corrupt program files, reinstall the software using the
following procedure.

Note

Software reinstallation is also necessary to:
• use the ESBK-7021 Basic DME Switcher Board.
• use a French or German version of menu screen

display. (The EditStation is shipped from the factory
with an English version of menu system installed in
it.)

Log on using the procedure explained in “Starting
the System” (page 17).

The desktop appears on the screen.

Insert the supplied CD-ROM disc.

For more information about inserting CD-ROM discs,
see “Inserting and removing CD-ROM discs” (page
66).

Click the Start button in the taskbar, move the
pointer to Settings and click Control Panel.

The Control Panel window opens.

Click the Add/Remove Programs icon and carry
out steps

below.

Click the Install/Uninstall tab and then click the
Install button.

Click the Next button.

Check to be sure that D:\SETUP.EXE is
displayed in the command line, and then click
the Finish button.

The setup program starts.
Follow the instructions on the screen to complete
the installation.

When the installation of the software is complete,
press the CD-ROM EJECT button to remove the
CD-ROM disc.

Summary of Contents for EditStation ES-7





















































































































Search results

Summary of Contents for EditStation ES-7

Reviews:

Related manuals for EditStation ES-7

Brands by name

Popular brands

Sony EditStation ES-7, Operating Instructions Manual

Search results

Summary of Contents for EditStation ES-7

Reviews:

Related manuals for EditStation ES-7

Brands by name

Popular brands